Residential Exterior Painting In Limerick & Clare

A full exterior repaint refreshes every painted surface on the property, from the front elevation to gables and rear walls, giving a consistent, uniform finish. We assess the whole exterior first so that any patch repairs, colour matching, or surface differences are handled before topcoats go on. This is usually the most cost effective option per square metre compared to painting sections separately, since setup, access, and material costs are spread across the full job.

Render, pebbledash, and brick each hold and shed paint differently, so we adjust preparation and product accordingly for a lasting finish. Textured surfaces like pebbledash need thorough cleaning and often a stabilising primer to bind loose material before any topcoat is applied. We use breathable masonry paints throughout so moisture already in the wall can escape, rather than becoming trapped and causing blistering later.

Timber cladding, fascia boards, and soffits take a heavier hit from Irish weather than masonry, so we check for rot, warping, and old flaking coatings before painting. Bare or previously unpainted timber is treated with an appropriate primer to stop moisture absorption and improve adhesion of the topcoat. Getting this right protects the timber structurally as well as visually, since neglected woodwork deteriorates far faster once the protective coating has failed.

Gable ends take the brunt of wind driven rain in many Limerick and Clare properties, so we pay close attention to render condition and drainage detailing in these areas. Boundary and garden walls are painted using the same weatherproof standards as the main house, since they are just as exposed to the elements and often more visible from the street. We can match these to your existing exterior colour scheme or treat them as a separate feature.

Every exterior job begins with a thorough power wash to remove dirt, moss, algae, and loose or flaking material before any paint is applied. This step is essential rather than cosmetic, since paint applied over a dirty or unstable surface will fail early regardless of the product quality used. We adjust water pressure to suit the surface, since older or softer render needs a gentler approach than modern brick or concrete.

Mould, algae, and moss are common on Irish exteriors, particularly on north facing walls, shaded areas, and properties near trees or damp ground. We treat affected areas with a fungicidal wash before painting to kill spores and reduce the chance of regrowth pushing through the new coating. Where the growth points to an underlying moisture issue, such as poor drainage or a leaking gutter, we will flag this so it can be addressed at the source.

Cracked or blown render is repaired before any painting takes place, since covering it with paint only hides the problem temporarily rather than fixing it. Small hairline cracks are filled with an appropriate exterior filler, while more significant render damage may need patch repair or partial re-rendering. Skipping this step is one of the most common reasons exterior paint jobs fail within a year or two, so we treat it as a non-negotiable part of the process.

Gutters, downpipes, and window trim are often overlooked, but tired or peeling paintwork on these details makes an otherwise fresh exterior look unfinished. We clean and prepare metal and PVC surfaces appropriately, since these materials need different primers and paints compared to render or timber. Including these details as part of the wider job gives a properly finished result rather than a house with mismatched, dated trim.